Above photos courtesy of Old Machine Press. While I'm working out the last few kinks in Operation Stude, I've decided that every now again I'll share a small blogroll...the coolest things I find around...

Although it was only last week when I posted that I'd dropped the engine back in my '55 Studebaker, that happened awhile back...I'm behind in my posting. While I have a couple more things to talk about in the...

Junkyards and swap meets are meccas for car enthusiasts - places to find that hidden treasure, rare part, or deal of a lifetime. While I've been to my fair share of swap meets, you'll probably be surprised...

Rounding that corner to where my car is actually being put together again seems a little bit like turning that last curve of a race, when it's the home stretch and you can finally see the finish. Months have...

Finally, the last thing on my engine rebuild before putting it back into Stude - at times it seemed like I'd never get here! With Studie's Small Block Chevy (SBC) looking so good, I could hardly just bolt my...

*This post was first sent out via newsletter! Be sure not to miss exclusive content in the future, and sign up for our monthly newsletter today! Sure you need to have the "how-to" for rebuilding an...

If you missed my post announcing that I'd be driving a 1955 Studebaker at Speedweek 2014, you don't yet know that I'm not referring to my own Studebaker but Jerry Hansen's '55 Studebaker! Before I jump in and...

One of the final things in my engine rebuild process is replacing the freeze plugs. We were waiting until the heads and intake manifold were on before doing this. What are freeze plugs you ask? Also known...

Now that the cylinder heads are on and Studie's Small Block Chevy (SBC) is taking form, the next step is adding the lifters, pushrods, rockers, and intake manifold - buttoning up the top of this...

Automotive interior is one of the most important areas of your car, it’s the one you spend the most time with! As I’m nearing the end of Operation Stude, I already have my sights set on the next project to...